#ad: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.
Want to turn a regular bulb on from your phone without buying a whole smart bulb? This Wi-Fi socket adapter sits between the lamp and the bulb.
I picked up a Wi-Fi smart bulb adapter that works with Amazon Alexa and Google Home. It does not change colors — it just lets you remotely switch an E26/E27 socket on and off. About $20. Here’s the build, why clearance matters, and how it behaved on a different Wi-Fi network than my phone. The button goes to the smart socket adapter on Amazon.
- Turns a normal bulb into a remotely switched light
- Works away from home over the internet
- Alexa / Google compatible
- About $20 to automate one socket
- Useful for pets, security lighting or hard-to-reach bulbs
- Adds ~2–2.5″ of height — may not clear harps/shades
- App can need a relaunch if it crashes
- Response depends on Wi-Fi strength; small delays possible
▶ Watch the full review on YouTube
What it is
Screw it into a normal medium base, then screw a bulb into the adapter. All plastic, not heavy, with a logo on the side. You are elevating the bulb out of the original socket.
Why I wanted one
When I had a dog I would leave and forget lights. Remote on is nice for pets, to discourage break-ins, or for garage and basement bulbs that are each on their own outlet and hard to reach. Pair it with a Wyze cam and you can light a room and look in.
App, lag and clearance
I put the bulb and phone on different Wi-Fi networks to test through the internet — it worked. Responsiveness is usually quick but depends on signal; sometimes the app crashed and needed a reopen. Clearance matters: on a traditional lamp with a 9-inch harp the shade bar did not clear the taller bulb, so plan on a smaller bulb or a different lamp. You need roughly two to two and a half inches of extra height.
Verdict
For about $20 you can add home automation to a dumb socket. Pretty nifty if the fixture has the room.
FAQ
Does it change colors?
No. On and off (and voice via Alexa/Google).
Do I have to be on the same Wi-Fi?
No. Once it is on your network you can trigger it over any internet connection.
Will it fit my lamp?
Only if you can add about 2–2.5 inches of height under the shade/harp.
How much was it?
About $20 for the one I tested.
Leave a Reply