#ad: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.

My side mirror had been missing its glass for a long time, so I tried a $20 piece of Burco replacement glass.
Burco makes replacement mirror glass for lots of cars, cut to shape with smoothed edges, and even versions with wiring for heated mirrors. My car is a 1979, so I was worried the glass would not match the opening, but the mirror housing was in good shape and this is the cheapest fix. I used Gorilla Max Strength Clear construction adhesive instead of the included pads.
- Cheap fix compared with a new mirror housing
- The glass fit my old car perfectly
- Includes adhesive pads
- Construction adhesive held it solid
- Mirror still adjusts from inside
- Need painter’s tape to hold it while it cures
- Have to find the glass for your exact car
- Both sides look reflective, so check the printed numbers
βΆ Watch the full review on YouTube
The problem
The glass had been gone so long that there was lint stuck to a semi-sticky backing. Only the gross plastic backing was left.
I checked the other side, and its glass is flat even though the housing looks convex. There is a little circle in the middle where the old mirror was mounted, which is the only place the glass really touches.

What comes in the pouch
The glass came in a bubble pouch with four double-sided sticky pads, so you can stack them if needed. Both sides of the glass looked very reflective.
The printed number reads backwards on one side. My guess is you want the side where the numbers read correctly facing out.

Gluing it in
I cleaned the housing and the glass with alcohol so there was no grease or finger oil. Instead of the pads, I used Gorilla Max Strength Clear construction adhesive, which is all weather, with a little in the middle and a bit on the glass.
I centered it by hand and used blue painter’s tape on a couple of sides to hold it while it was still gooey. Then I gave it all day and all night to dry.

About the buy link
Burco mirror glass is cut for specific cars, so the old link was just an Amazon search. The button goes to the Gorilla Max Strength Clear construction adhesive I used in the video. For the glass, search Burco replacement mirror glass on Amazon with your car’s year, make, model and side.
The result
After pulling the tape, the glass was in and stable, and I could still adjust the mirror from inside the car. Now I have a real mirror that keeps me safe.
If you mess it up, the glass was cheap enough to just break off and try again. Look up the Burco glass for your car’s year, make and model.
FAQ
How much did the replacement mirror glass cost?
About $20.
Should I use the included pads or glue?
I used Gorilla Max Strength Clear construction adhesive so it would stay on, plus tape while it cured.
Which side of the glass faces out?
I went with the side where the printed numbers read correctly.
How long should it cure?
I gave it all day and overnight before removing the tape.
Is this an affiliate link?
Yes. The buttons are #ad affiliate links, and as an Amazon Associate I earn from qualifying purchases. It costs you nothing extra.
Leave a Reply