#ad: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.

I love a real fir tree, but I cannot stand how quickly they dry out, the fire risk, and buying a new one every year.
So I bought this pre-lit artificial Christmas tree. It is about 7 feet tall, comes in three sections, and has twinkly lights already on it. Here is how it goes together, what surprised me about the wiring, and how it looks lit up. And it was cheap.
- No more trips to cut a tree, sap or annual cost
- Pre-lit, so no stringing lights
- Separate plug per section makes wiring simple
- Branches fold up for storage
- Spreading all the branches takes time
- The top section’s plug is green on green and hard to see
▶ Watch the full review on YouTube
Which section goes where
You get three pieces. The small one is obviously the top, but it is not obvious which of the other two is the base. Look at the pipe: I expected the crimped piece to be the middle, but it actually goes in first, into the stand.
Take off the little band holding the branches down, drop it in, tighten it with your thumb, and let the branches fall open.

Spreading the branches
Once all three pieces are on, there are lots of holes, so you spend some time spreading the branches. That is really what fills it out and makes it look right. I put on a podcast while I did it.
The nice part is that next year the branches fold back up so it compresses for storage.

The wiring surprise
On trees I have had before, the sections plug into each other in a chain. This one has a two-prong plug with a fuse and three separate plugs hanging off it, one for each level, which I think makes it easier.
I spun the sections so the plugs are on the back and any hanging wires are less obvious. The red ribbons on the plugs help a lot. The top one does not have one, and green on green is very hard to see, so I would add your own.

Lit up
Flip the switch and, oh yes, it feels like Christmas. With little twinkly lights all over it, it looks like a real Christmas tree from across the room, delivered pre-lit with no trudging through the forest or getting sappy.
FAQ
How tall is the tree?
About 7 feet. It is at least a foot taller than me, and I am almost 6 feet.
How do the lights connect?
One two-prong plug with a fuse splits into three plugs, one per section, so they do not chain together.
How long does setup take?
Putting the sections together is quick. Spreading the branches is the part that takes a while.
Is this an affiliate link?
Yes. The buttons are #ad affiliate links, and as an Amazon Associate I earn from qualifying purchases. It costs you nothing extra.
Leave a Reply