#ad: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.

Jaguars have a reputation, but this is the easiest plug change I’ve seen.
Today I wanted to see if changing the spark plugs on an old Jaguar is super easy or super hard. I don’t know when they were last done, so I replaced them. This isn’t a full-blown tune-up, just new plugs and a look at the old ones to check for oil or excessive carbon buildup, which can be signs of a problem. The great thing about this engine is that it’s an inline six-cylinder, and the plugs are right on top in the middle, all marked.
- Plugs are right on top of the engine
- Coil boots are marked
- Pre-gapped NGKs save a step
- Smoother idle afterward
- Great first plug job for a beginner
- Check your exact plug part number first
- Inspect old plugs for oil or carbon
- Doesn’t replace a full tune-up
▶ Watch the full review on YouTube
Tools and parts
I got NGK plugs that came pre-gapped, I had anti-seize, and I used a spark plug socket with a small extension. That’s really all you need for this engine. It looked like I could just pull each boot off and swap the plug.

What the old plugs looked like
The first plug I pulled was a little fouled, with some corrosion on the tip. It’s not the worst plug I’ve ever seen. I liked that it didn’t seem overly oily, but it was a good sign that they all needed replacing. So I took the rest out and put the new ones in.

Why this engine is easy
Jaguar motors are notorious for being unreliable, but if you’re a beginner, there’s probably no easier spark plug change than this one. Inline six-cylinder, and everything’s right up on top.

Moment of truth
Key in, foot on the brake, and we’re in business. One thing I didn’t screw up. And it was idling a lot smoother, too. The old plugs worked, but they weren’t great.
About the buy link
My original link was just an Amazon search for spark plugs. The right plug depends on your exact engine, so the button goes to a spark plug socket set with a ratchet, extension and gapper, the kind of tools I used. Look up your plug part number separately.
My take
If you’ve never changed spark plugs and you have an inline-six like this, it’s a great first job. Inspect the old plugs, use anti-seize, and take your time.
FAQ
What spark plugs did I use?
NGK plugs that came pre-gapped. Look up the right part number for your engine before you buy.
Do I need anti-seize?
I used it on the new plugs.
Did new plugs make a difference?
Yes. The engine idled a lot smoother afterward.
Is this an affiliate link?
Yes. The buttons are #ad affiliate links, and as an Amazon Associate I earn from qualifying purchases. It costs you nothing extra.
Leave a Reply